PartsTable
Technical Data Sheet
Download PDF

125812 — ROD,PUSH

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

125812: ROD,PUSH.

- Exclusive wooden frame in a modern design - Incl. premium glass, antireflex coating on one side - Float glass quality, ground and washed - Precision mitre. Key specifications include material: PLASTIC, end_item_identification: PV6B AND PV8B PUMP.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-334-0476, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125812
NSN: 5330-00-334-0476
NIINs: 003340476, 015929171
FSC: 5330 — Packing and Gasket Materials
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
materialPLASTIC
end_item_identificationPV6B AND PV8B PUMP
NSN5330-00-334-0476
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 125812 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER GROOVE DEPTH: 0.031 INCHES NOMINAL IN
•
OUTER GROOVE SMALLEST WIDTH: 0.109 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 63.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 6.000 INCHES NOMINAL IN
•
OUTER GROOVE WIDTH: 0.141 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER GROOVE DEPTH0.031 INCHES NOMINAL IN
OUTER GROOVE SMALLEST WIDTH0.109 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 63.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER6.000 INCHES NOMINAL IN
OUTER GROOVE WIDTH0.141 INCHES NOMINAL IN
INNER GROOVE WIDTH0.250 INCHES NOMINAL IN
CENTER HOLE DIAMETER5.312 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
700581PC60HSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
800033PC50FSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
12FA1-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
700152PC60HSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3372558Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 125812?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125812?
125812 is a ROD,PUSH manufactured by Hama.
What parts can replace 125812?
There are 5 known substitutes for 125812: 700581PC60H, 800033PC50F, 12FA1-8 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 125812?
125812 is cataloged in the U.S. Government catalog under NSN 5330-00-334-0476. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125812

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.