PartsTable
Technical Data Sheet
Download PDF

125809 — CRIMPING TOOL,TERMINAL,HAND

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

125809: CRIMPING TOOL,TERMINAL,HAND.

- Exclusive wooden frame in a modern design - Incl. premium glass, antireflex coating on one side - Float glass quality, ground and washed - Precision mitre - Back with a heavy-duty hook This part is cataloged in the U.S. Government catalog under NSN 5330-00-297-5644, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125809
NSN: 5330-00-297-5644
NIINs: 002975644, 011016683
FSC: 5330 — Packing and Gasket Materials
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
operation_methodMANUAL COMPRESSION
special_featuresCOMFORT GRIP HANDLES; 9-3/4 IN. LG; FOR INSULATED AND NON-INSULATED TERMINALS IN
features_providedCUTTING JAW
wire_size_accommodated10.000 AWG MINIMUM AND 22.000 AWG MAXIMUM
NSN5330-00-297-5644
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 125809 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER GROOVE DEPTH: 0.125 INCHES NOMINAL IN
•
TEMP RATING: 350.0 FAHRENHEIT DEGF
•
OUTER GROOVE SMALLEST WIDTH: 0.078 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.438 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 63.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 4.312 INCHES NOMINAL IN
•
OUTER GROOVE WIDTH: 0.109 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER GROOVE DEPTH0.125 INCHES NOMINAL IN
TEMP RATING350.0 FAHRENHEIT DEGF
OUTER GROOVE SMALLEST WIDTH0.078 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.438 INCHES NOMINAL IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 63.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER4.312 INCHES NOMINAL IN
OUTER GROOVE WIDTH0.109 INCHES NOMINAL IN
INNER GROOVE WIDTH0.219 INCHES NOMINAL IN
CENTER HOLE DIAMETER3.781 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
5330PL1244299Reference document
Same NSN cross-reference
Reference document — Informative reference only
706050Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 125809?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125809?
125809 is a CRIMPING TOOL,TERMINAL,HAND manufactured by Hama.
What parts can replace 125809?
There are 2 known substitutes for 125809: 5330PL1244299, 706050. Substitute compatibility should be verified for your specific system.
What is the NSN for 125809?
125809 is cataloged in the U.S. Government catalog under NSN 5330-00-297-5644. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125809

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.