PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 125751
125751 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The TAP,THREAD CUTTING is a Hama industrial component. Key specifications include end_item_identification: 6680008286559, general_characteristics_item_description: STEEL,9.000 IN. LG,8.000 IN.

W,3.000 IN. H IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-5751, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125751
NSN: 5310-00-012-5751
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
end_item_identification6680008286559
general_characteristics_item_descriptionSTEEL,9.000 IN. LG,8.000 IN. W,3.000 IN. H IN
NSN5310-00-012-5751
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 125751 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
HOLE DIAMETER: 0.221 INCHES MINIMUM AND 0.231 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.460 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORFLAT EXTERNAL TEETH
HOLE DIAMETER0.221 INCHES MINIMUM AND 0.231 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.460 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
GGG-T-70 TY1SEBSTBInterchangeable
interchangeable cross-reference
interchangeable
B94.9 7/8-14 UNF HS G H2Interchangeable
interchangeable cross-reference
interchangeable
13174Interchangeable
interchangeable cross-reference
interchangeable
52912Interchangeable
interchangeable cross-reference
interchangeable
SM-B-148529Interchangeable
interchangeable cross-reference
interchangeable
180647Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 125751?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125751?
125751 is a TAP,THREAD CUTTING manufactured by Hama.
What parts can replace 125751?
There are 16 known substitutes for 125751: GGG-T-70 TY1SEBSTB, B94.9 7/8-14 UNF HS G H2, 13174 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 125751?
125751 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-5751. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125751

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026