PartsTable
Technical Data Sheet
Download PDF

12561715-11 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12561715-11: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), special_features: MEETS IAW REQUIREMENTS OF GM E31.101-E31.152, EXCEPT FOR FINISH SPECIFIED IAW DRAWING 12469117. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-694-5408, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12561715-11
NSN: 5310-01-694-5408
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
special_featuresMEETS IAW REQUIREMENTS OF GM E31.101-E31.152, EXCEPT FOR FINISH SPECIFIED IAW DRAWING 12469117
thread_directionRIGHT-HAND
width_across_flats0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES IN
bearing_surface_typeFLAT
end_item_identification015953986
thread_quantity_per_inch24
NSN5310-01-694-5408
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12561715-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
SPECIAL FEATURESMEETS IAW REQUIREMENTS OF GM E31.101-E31.152, EXCEPT FOR FINISH SPECIFIED IAW DRAWING 12469117
PART NAME ASSIGNED BY CONTROLLING AGENCYNUT,PLAIN,HEXAGON
NUT STYLEHEXAGON
THREAD CLASS2B
END ITEM IDENTIFICATION015953986
SUBSTITUTES & CROSS-REFERENCES 1
12561715Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12561715-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12561715-11?
12561715-11 is a NUT,PLAIN,HEXAGON.
What parts can replace 12561715-11?
There is 1 known substitute for 12561715-11: 12561715. Substitute compatibility should be verified for your specific system.
What is the NSN for 12561715-11?
12561715-11 is cataloged in the U.S. Government catalog under NSN 5310-01-694-5408. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12561715-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.