PartsTable
Technical Data Sheet
Download PDF

12561706 61 — SCREW,TAPPING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

12561706 61: SCREW,TAPPING.

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.181 INCHES NOMINAL IN, fastener_length: 1.000 INCHES NOMINAL IN, special_features: MEETS IAW REQUIREMENTS OF GM D-3.701-D-3.723, EXCEPT FOR FINISH SPECIFIED IAW DRAWING 12469117, width_between_flats: 0.340 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-694-5940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12561706 61
NSN: 5305-01-694-5940
FSC: 5305 — Screws
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.181 INCHES NOMINAL IN
fastener_length1.000 INCHES NOMINAL IN
special_featuresMEETS IAW REQUIREMENTS OF GM D-3.701-D-3.723, EXCEPT FOR FINISH SPECIFIED IAW DRAWING 12469117
width_between_flats0.340 INCHES NOMINAL IN
internal_drive_styleSLOT
end_item_identification015953986
nonmachine_thread_styleTHRU SLOT (TYPE D)
nonmachine_nominal_thread_diameter0.250 INCHES IN
part_name_assigned_by_controlling_agencySCREW, TAPPING, THREAD CUTTING
NSN5305-01-694-5940
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 12561706 61 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD HEIGHT: 0.181 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
NONMACHINE THREAD STYLE: THRU SLOT (TYPE D)
•
HEAD STYLE: HEXAGON
•
WIDTH BETWEEN FLATS: 0.340 INCHES NOMINAL IN
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD HEIGHT0.181 INCHES NOMINAL IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
NONMACHINE THREAD STYLETHRU SLOT (TYPE D)
HEAD STYLEHEXAGON
WIDTH BETWEEN FLATS0.340 INCHES NOMINAL IN
SPECIAL FEATURESMEETS IAW REQUIREMENTS OF GM D-3.701-D-3.723, EXCEPT FOR FINISH SPECIFIED IAW DRAWING 12469117
INTERNAL DRIVE STYLESLOT
PART NAME ASSIGNED BY CONTROLLING AGENCYSCREW, TAPPING, THREAD CUTTING
END ITEM IDENTIFICATION015953986
SUBSTITUTES & CROSS-REFERENCES 1
12561706Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12561706 61?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12561706 61?
12561706 61 is a SCREW,TAPPING.
What parts can replace 12561706 61?
There is 1 known substitute for 12561706 61: 12561706. Substitute compatibility should be verified for your specific system.
What is the NSN for 12561706 61?
12561706 61 is cataloged in the U.S. Government catalog under NSN 5305-01-694-5940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12561706 61

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.