PartsTable
Technical Data Sheet
Download PDF

12561700-15 — NUT,SELF-LOCKING,EXTENDED WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12561700-15: NUT,SELF-LOCKING,EXTENDED WASHER.

NUT,SELF-LOCKING,EXTENDED WASHER. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, lubrication: DRY FILM LUBRICANT, thread_class: 2B, thread_series: UNF, overall_height: 0.425 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-696-4027, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12561700-15
NSN: 5310-01-696-4027
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
lubricationDRY FILM LUBRICANT
thread_class2B
thread_seriesUNF
overall_height0.425 INCHES MAXIMUM IN
hardness_rating24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
washer_thickness0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
surface_treatmentZINC OVERALL
width_across_flats0.551 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
NSN5310-01-696-4027
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12561700-15 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WASHER OUTSIDE DIAMETER: 0.810 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.551 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: CAGE 19207, DWG 12469117 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
WASHER THICKNESS: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
OVERALL HEIGHT0.425 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.810 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.551 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONCAGE 19207, DWG 12469117 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
HARDNESS RATING24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
WASHER THICKNESS0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 1
12561700Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12561700-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12561700-15?
12561700-15 is a NUT,SELF-LOCKING,EXTENDED WASHER.
What parts can replace 12561700-15?
There is 1 known substitute for 12561700-15: 12561700. Substitute compatibility should be verified for your specific system.
What is the NSN for 12561700-15?
12561700-15 is cataloged in the U.S. Government catalog under NSN 5310-01-696-4027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12561700-15

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.