PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 125609
125609 ✓ Verified by PartsTable
Disguise · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CUP,OIL,LUBRICATING is a Disguise industrial component. Key specifications include height: 0.469 INCHES NOMINAL IN, diameter: 2.000 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT, shank_length: 0.203 INCHES NOMINAL IN, chamfer_length: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-252-5997, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125609
NSN: 5315-00-252-5997
FSC: 5315
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
height0.469 INCHES NOMINAL IN
diameter2.000 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT
shank_length0.203 INCHES NOMINAL IN
chamfer_length0.250 INCHES NOMINAL IN
shank_diameter0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
style_designatorSTRAIGHT, HINGED CAP, W/SHOULDER
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter2.500 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
under_head_length13.250 INCHES NOMINAL IN
NSN5315-00-252-5997
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 125609 · Disguise ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN HEAD DIAMETER: 2.500 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.750 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
HEIGHT: 0.375 INCHES NOMINAL IN
•
CHAMFER LENGTH: 0.250 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 13.250 INCHES NOMINAL IN
•
DIAMETER: 2.000 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
TECHNICAL CHARACTERISTICS (FLIS)
PIN HEAD DIAMETER2.500 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.750 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
HEIGHT0.375 INCHES NOMINAL IN
CHAMFER LENGTH0.250 INCHES NOMINAL IN
UNDER HEAD LENGTH13.250 INCHES NOMINAL IN
DIAMETER2.000 INCHES NOMINAL IN
HEAD STYLEFLAT
HOLE ARRANGEMENT STYLEONE END DRILLED
STYLE DESIGNATORSTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
125609Interchangeable
interchangeable cross-reference
interchangeable
25609Interchangeable
interchangeable cross-reference
interchangeable
9194068-14Interchangeable
interchangeable cross-reference
interchangeable
29811Interchangeable
interchangeable cross-reference
interchangeable
10106149Interchangeable
interchangeable cross-reference
interchangeable
84000435Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 125609?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125609?
125609 is a CUP,OIL,LUBRICATING manufactured by Disguise.
What parts can replace 125609?
There are 12 known substitutes for 125609: 125609, 25609, 9194068-14 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 125609?
125609 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-252-5997. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125609

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026