PartsTable
Technical Data Sheet
Download PDF

12543065-013 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

12543065-013: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.371 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.375 INCHES NOMINAL IN, fastener_length: 1.750 INCHES MAXIMUM IN, special_features: FINISH IN ACCORDANCE WITH 12424710 METHOD 4. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-725-0712, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12543065-013
NSN: 5305-01-725-0712
FSC: 5305 — Screws
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.371 INCHES MAXIMUM IN
thread_class2A A
thread_length1.375 INCHES NOMINAL IN
fastener_length1.750 INCHES MAXIMUM IN
special_featuresFINISH IN ACCORDANCE WITH 12424710 METHOD 4
thread_directionRIGHT-HAND
width_between_flats0.812 INCHES MAXIMUM IN
end_item_identification2355-01-654-5245
nominal_thread_diameter0.563 INCHES IN
thread_quantity_per_inch12
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-725-0712
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 12543065-013 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.371 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.750 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.375 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.563 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.812 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.371 INCHES MAXIMUM IN
FASTENER LENGTH1.750 INCHES MAXIMUM IN
THREAD LENGTH1.375 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.563 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.812 INCHES MAXIMUM IN
SPECIAL FEATURESFINISH IN ACCORDANCE WITH 12424710 METHOD 4
PART NAME ASSIGNED BY CONTROLLING AGENCYSCREW, CAP, HEX
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
12543065Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12543065-013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12543065-013?
12543065-013 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 12543065-013?
There is 1 known substitute for 12543065-013: 12543065. Substitute compatibility should be verified for your specific system.
What is the NSN for 12543065-013?
12543065-013 is cataloged in the U.S. Government catalog under NSN 5305-01-725-0712. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12543065-013

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.