PartsTable
Technical Data Sheet
Download PDF

12543055-008 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12543055-008: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.065 INCHES NOMINAL IN, hole_diameter: 0.276 INCHES MINIMUM IN, overall_diameter: 0.640 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-644-2386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12543055-008
NSN: 5310-01-644-2386
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.065 INCHES NOMINAL IN
hole_diameter0.276 INCHES MINIMUM IN
overall_diameter0.640 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification2320-01-595-3994
cross-sectional_shape_styleBLANK RECTANGULAR
part_name_assigned_by_controlling_agencyWASHER PLAIN
NSN5310-01-644-2386
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12543055-008 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.640 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: BLANK RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.276 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.640 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEBLANK RECTANGULAR
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER PLAIN
END ITEM IDENTIFICATION2320-01-595-3994
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.276 INCHES MINIMUM IN
THICKNESS0.065 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
12543055Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12543055-008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12543055-008?
12543055-008 is a WASHER,FLAT.
What parts can replace 12543055-008?
There is 1 known substitute for 12543055-008: 12543055. Substitute compatibility should be verified for your specific system.
What is the NSN for 12543055-008?
12543055-008 is cataloged in the U.S. Government catalog under NSN 5310-01-644-2386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12543055-008

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.