PartsTable
Technical Data Sheet
Download PDF

125375-1 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

125375-1: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.780 INCHES NOMINAL IN, material: ALUMINUM ALLOY 7075 OVERALL, closed_length: 16.950 INCHES MINIMUM AND 17.050 INCHES MAXIMUM IN, extended_length: 20.940 INCHES MINIMUM AND 21.060 INCHES MAXIMUM IN, mounting_method: THREADED HOLE(S), special_features: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO0364NRP.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-266-6583, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125375-1
NSN: 5340-01-266-6583
FSC: 5340 — Hardware, Commercial
CAGE: 94271 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
width0.780 INCHES NOMINAL IN
materialALUMINUM ALLOY 7075 OVERALL
closed_length16.950 INCHES MINIMUM AND 17.050 INCHES MAXIMUM IN
extended_length20.940 INCHES MINIMUM AND 21.060 INCHES MAXIMUM IN
mounting_methodTHREADED HOLE(S)
special_featuresITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO0364NRP
surface_treatmentANODIZE OVERALL
special_test_featuresSPECIAL QUALITY CONTROL TESTING
side_for_which_designedRIGHT HAND
departure_from_cited_documentAS MODIFIED BY MATERIAL
criticality_code_justificationZZZY
material_document_and_classificationQQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-266-6583
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 125375-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED LENGTH: 20.940 INCHES MINIMUM AND 21.060 INCHES MAXIMUM IN
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
MOUNTING METHOD: THREADED HOLE(S)
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL
•
CLOSED LENGTH: 16.950 INCHES MINIMUM AND 17.050 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED LENGTH20.940 INCHES MINIMUM AND 21.060 INCHES MAXIMUM IN
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
MOUNTING METHODTHREADED HOLE(S)
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY MATERIAL
CLOSED LENGTH16.950 INCHES MINIMUM AND 17.050 INCHES MAXIMUM IN
SPECIAL FEATURESITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO0364NRP
SURFACE TREATMENTANODIZE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
P00364NRPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1H0099LCHX53796Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 125375-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125375-1?
125375-1 is a SLIDE,DRAWER,EXTENSION.
What parts can replace 125375-1?
There are 2 known substitutes for 125375-1: P00364NRP, 1H0099LCHX53796. Substitute compatibility should be verified for your specific system.
What is the NSN for 125375-1?
125375-1 is cataloged in the U.S. Government catalog under NSN 5340-01-266-6583. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125375-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.