PartsTable
Technical Data Sheet
12528 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FUSE LINK,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, point_type: CONVENTIONAL, seal_width: 0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-117-5677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 12528
NSN: 5340-00-117-5677
FSC: 5340
CAGE: 83445 — AEROL LLC (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
point_typeCONVENTIONAL
seal_width0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length7.500 INCHES NOMINAL IN
flute_quantity2
overall_length12.125 INCHES NOMINAL IN
special_featuresEND ITEM: PANEL CONTROL 440V-220V-24V WITH COMPONENTS. V
cutting_end_styleGENERAL PURPOSE
housing_bore_diameter1.375 INCHES NOMINAL IN
NSN5340-00-117-5677
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12528 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESALUMINUM CASTER RIGID P/N 25040-475;WHEEL P/N AER 10-7-06; BRAKE P/N 51500-L AND P/N 51500-R; 13.750 IN. OVERALL HEIGTH; 5.880 IN. WD; FOUR MOUNTING HOLES FOR 0.500 IN. BOLTS IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
AE89407MUpgraded Successor
successor cross-reference
successor
AE8940MUpgraded Successor
successor cross-reference
successor
12528Upgraded Successor
successor cross-reference
successor
1280858Interchangeable
interchangeable cross-reference
interchangeable
2411 1-7/32Interchangeable
interchangeable cross-reference
interchangeable
53578Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12528?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12528?
12528 is a FUSE LINK,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 12528?
There are 12 known substitutes for 12528: AE89407M, AE8940M, 12528 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12528?
12528 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-117-5677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12528