PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 125224
125224 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The DRILL,TWIST is a Hama industrial component. Key specifications include special_features: PACKING, PREFORMED, SEAL, TRI-CLOVER, NOM SIZE 25.4MM / 1 INCH, EPDM RUBBER, TYPE A RETURN LIP MM, part_name_assigned_by_controlling_agency: SANITARY FITTINGS AND VALVES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-392-2113, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125224
NSN: 5310-00-392-2113
FSC: 5310
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
special_featuresPACKING, PREFORMED, SEAL, TRI-CLOVER, NOM SIZE 25.4MM / 1 INCH, EPDM RUBBER, TYPE A RETURN LIP MM
part_name_assigned_by_controlling_agencySANITARY FITTINGS AND VALVES
NSN5310-00-392-2113
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 125224 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
BEARING SURFACE TYPE: WASHER FACED
•
NOMINAL THREAD SIZE: 1.312 INCHES IN
•
THREAD QUANTITY PER INCH: 12
•
MATERIAL: STEEL OVERALL
•
WIDTH ACROSS FLATS: 1.812 INCHES NOMINAL IN
•
THREAD CLASS: 2B
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIESUN
BEARING SURFACE TYPEWASHER FACED
NOMINAL THREAD SIZE1.312 INCHES IN
THREAD QUANTITY PER INCH12
MATERIALSTEEL OVERALL
WIDTH ACROSS FLATS1.812 INCHES NOMINAL IN
THREAD CLASS2B
THREAD DIRECTIONRIGHT-HAND
NUT STYLEHEXAGON
NUT HEIGHT1.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
R11417Interchangeable
interchangeable cross-reference
interchangeable
3R2169Interchangeable
interchangeable cross-reference
interchangeable
3-424Interchangeable
interchangeable cross-reference
interchangeable
1241125-6CR-0140-090Interchangeable
interchangeable cross-reference
interchangeable
6846454-061140Interchangeable
interchangeable cross-reference
interchangeable
6844749-061140Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 125224?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125224?
125224 is a DRILL,TWIST manufactured by Hama.
What parts can replace 125224?
There are 14 known substitutes for 125224: R11417, 3R2169, 3-424 and 11 more. Substitute compatibility should be verified for your specific system.
Is 125224 still available?
125224 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125224

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026