PartsTable
Technical Data Sheet
Download PDF

125205 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

125205: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.062 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.250 INCHES NOMINAL IN, thread_length: 0.250 INCHES MINIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-208-0321, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125205
NSN: 5305-00-208-0321
FSC: 5305 — Screws
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
head_styleFLAT CHAMFER
head_height0.062 INCHES NOMINAL IN
thread_class2A A
head_diameter0.250 INCHES NOMINAL IN
thread_length0.250 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.422 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentCHROMATE ZINC
thread_quantity_per_inch40
NSN5305-00-208-0321
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 125205 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: CHROMATE ZINC
•
FASTENER LENGTH: 0.422 INCHES NOMINAL IN
•
THREAD LENGTH: 0.250 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.062 INCHES NOMINAL IN
SCREW SURFACE TREATMENTCHROMATE ZINC
FASTENER LENGTH0.422 INCHES NOMINAL IN
THREAD LENGTH0.250 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
33-296Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 125205?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125205?
125205 is a SCREW,MACHINE.
What parts can replace 125205?
There is 1 known substitute for 125205: 33-296. Substitute compatibility should be verified for your specific system.
What is the NSN for 125205?
125205 is cataloged in the U.S. Government catalog under NSN 5305-00-208-0321. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125205

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.