PartsTable
Technical Data Sheet
Download PDF

12510017 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12510017: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_style: SQUARE, first_leg_width: 0.432 INCHES NOMINAL IN, style_designator: OFFSET ANGLE, end_item_identification: 3530-01-645-4321, first_leg_hole_arrangement_style: FOUR HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-700-6435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12510017
NSN: 5340-01-700-6435
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
first_leg_styleSQUARE
first_leg_width0.432 INCHES NOMINAL IN
style_designatorOFFSET ANGLE
end_item_identification3530-01-645-4321
first_leg_hole_arrangement_styleFOUR HOLES
second_leg_relationship_to_first_legNOT IDENTICAL
part_name_assigned_by_controlling_agencyBRACKET, ANGLE
NSN5340-01-700-6435
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12510017 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
FIRST LEG HOLE ARRANGEMENT STYLE: FOUR HOLES
•
STYLE DESIGNATOR: OFFSET ANGLE
•
FIRST LEG STYLE: SQUARE
•
FIRST LEG WIDTH: 0.432 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
FIRST LEG HOLE ARRANGEMENT STYLEFOUR HOLES
STYLE DESIGNATOROFFSET ANGLE
FIRST LEG STYLESQUARE
FIRST LEG WIDTH0.432 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET, ANGLE
END ITEM IDENTIFICATION3530-01-645-4321
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12510017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12510017?
12510017 is a BRACKET,ANGLE.
What is the NSN for 12510017?
12510017 is cataloged in the U.S. Government catalog under NSN 5340-01-700-6435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12510017