12508415 — PIN,GROOVED,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

12508415: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, material: STEEL COMP 303 OR STEEL COMP 316 OVERALL, overall_length: 1.599 INCHES MINIMUM AND 1.600 INCHES MAXIMUM IN, undercut_width: 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN, first_end_style: CHAMFERED, effective_length: 1.520 INCHES MINIMUM AND 1.521 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-603-0107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

12508415

NSN: 5315-01-603-0107
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

diameter	0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
material	STEEL COMP 303 OR STEEL COMP 316 OVERALL
overall_length	1.599 INCHES MINIMUM AND 1.600 INCHES MAXIMUM IN
undercut_width	0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
first_end_style	CHAMFERED
effective_length	1.520 INCHES MINIMUM AND 1.521 INCHES MAXIMUM IN
second_end_style	CHAMFERED
style_designator	GROOVE
surface_treatment	PASSIVATE OVERALL
undercut_diameter	0.286 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
first_end_location	BOTH ENDS
first_end_taper_angle	45.0 DEGREES NOMINAL
NSN	5315-01-603-0107

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.020 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 0.286 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN

•

FIRST END LOCATION: BOTH ENDS

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SAE-AMS 2700 ASSN STD SINGLE TREATMENT RESPONSE OVERALL

•

SECOND END TAPER ANGLE: 45.0 DEGREES NOMINAL

•

FIRST END STYLE: CHAMFERED

•

STYLE DESIGNATOR: GROOVE

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.020 INCHES NOMINAL IN
UNDERCUT DIAMETER	0.286 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
FIRST END LOCATION	BOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	SAE-AMS 2700 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SECOND END TAPER ANGLE	45.0 DEGREES NOMINAL
FIRST END STYLE	CHAMFERED
STYLE DESIGNATOR	GROOVE
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR 582 ASSN STD SINGLE MATERIAL RESPONSE OR 276 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

28KP661Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 12508415?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 12508415?

12508415 is a PIN,GROOVED,HEADLESS.

What parts can replace 12508415?

There is 1 known substitute for 12508415: 28KP661. Substitute compatibility should be verified for your specific system.

What is the NSN for 12508415?

12508415 is cataloged in the U.S. Government catalog under NSN 5315-01-603-0107. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

12508415 — PIN,GROOVED,HEADLESS

Request a Quote — 12508415