PartsTable
Technical Data Sheet
12505287-100 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, special_features: OVERALL HEIGHT 0.79 INCHES; MATERIAL POLYPROPYLENE; COLOR FLAT BLACK IN, length_under_shoulder: 0.410 INCHES NOMINAL IN, end_item_identification: 2320-01-549-8565; TRUCK, CARGO, open_end_inside_diameter: 1.060 INCHES NOMINAL IN, closed_end_overall_diameter: 0.310 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-568-0433, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12505287-100
NSN: 5340-01-568-0433
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPLASTIC
special_featuresOVERALL HEIGHT 0.79 INCHES; MATERIAL POLYPROPYLENE; COLOR FLAT BLACK IN
length_under_shoulder0.410 INCHES NOMINAL IN
end_item_identification2320-01-549-8565; TRUCK, CARGO
open_end_inside_diameter1.060 INCHES NOMINAL IN
closed_end_overall_diameter0.310 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyPLUG
NSN5340-01-568-0433
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12505287-100 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: PLASTIC
LENGTH UNDER SHOULDER: 0.410 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER: 1.060 INCHES NOMINAL IN
CLOSED END OVERALL DIAMETER: 0.310 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC
END ITEM IDENTIFICATION2320-01-549-8565; TRUCK, CARGO
LENGTH UNDER SHOULDER0.410 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPLUG
OPEN END INSIDE DIAMETER1.060 INCHES NOMINAL IN
CLOSED END OVERALL DIAMETER0.310 INCHES NOMINAL IN
SPECIAL FEATURESOVERALL HEIGHT 0.79 INCHES; MATERIAL POLYPROPYLENE; COLOR FLAT BLACK IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
12505287Upgraded Successor
successor cross-reference
successor
BL4Interchangeable
interchangeable cross-reference
interchangeable
10960Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12505287-100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12505287-100?
12505287-100 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 12505287-100?
There are 3 known substitutes for 12505287-100: 12505287, BL4, 10960. Substitute compatibility should be verified for your specific system.
What is the NSN for 12505287-100?
12505287-100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-568-0433. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12505287-100