PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12500625
12500625 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: STEEL, block_height: 0.73 INCHES NOMINAL IN, overall_width: 0.70 INCHES MINIMUM AND 0.76 INCHES MAXIMUM IN, overall_length: 2.97 INCHES MINIMUM AND 3.03 INCHES MAXIMUM IN, mounting_hole_diameter: 0.250 INCHES NOMINAL IN, end_item_identification: 010871095. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-146-1634, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12500625
NSN: 5330-01-146-1634
FSC: 5330
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialSTEEL
block_height0.73 INCHES NOMINAL IN
overall_width0.70 INCHES MINIMUM AND 0.76 INCHES MAXIMUM IN
overall_length2.97 INCHES MINIMUM AND 3.03 INCHES MAXIMUM IN
mounting_hole_diameter0.250 INCHES NOMINAL IN
mounting_hole_quantity2
end_item_identification010871095
part_name_assigned_by_controlling_agencyCLAMP
distance_from_end_to_first_mounting_hole_center0.49 INCHES MINIMUM AND 0.51 INCHES MAXIMUM IN
distance_from_center_of_mounting_hole_to_edge_along_the_width0.35 INCHES MINIMUM AND 0.41 INCHES MAXIMUM IN
NSN5330-01-146-1634
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12500625 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
40602Interchangeable
interchangeable cross-reference
interchangeable
LA53-40595 ITEM 20Interchangeable
interchangeable cross-reference
interchangeable
4615-12500625Interchangeable
interchangeable cross-reference
interchangeable
12500625Interchangeable
interchangeable cross-reference
interchangeable
A37935-3Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12500625?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12500625?
12500625 is a CLAMP,BLOCK,SECTION.
What parts can replace 12500625?
There are 5 known substitutes for 12500625: 40602, LA53-40595 ITEM 20, 4615-12500625 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12500625?
12500625 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-146-1634. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12500625

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026