PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1250-1SZ28T031
1250-1SZ28T031 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, overall_length: 2.312 INCHES NOMINAL IN, handle_clearance: 1.000 INCHES NOMINAL IN, surface_treatment: NICKEL OVERALL, nominal_thread_size: 0.164 INCHES IN, thread_series_designator: UNIFIED NATIONAL COARSE (UNC). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-860-6610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1250-1SZ28T031
NSN: 5340-00-860-6610
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
overall_length2.312 INCHES NOMINAL IN
handle_clearance1.000 INCHES NOMINAL IN
surface_treatmentNICKEL OVERALL
nominal_thread_size0.164 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity2
center_to_center_distance_between_mounting_facilities_parallel_to_length2.000 INCHES NOMINAL IN
NSN5340-00-860-6610
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1250-1SZ28T031 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 2.000 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SURFACE TREATMENT: NICKEL OVERALL
•
HANDLE CLEARANCE: 1.000 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
MOUNTING FACILITY QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.000 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SURFACE TREATMENTNICKEL OVERALL
HANDLE CLEARANCE1.000 INCHES NOMINAL IN
OVERALL LENGTH2.312 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
NOMINAL THREAD SIZE0.164 INCHES IN
MOUNTING FACILITY QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
12501Interchangeable
interchangeable cross-reference
interchangeable
10082457Interchangeable
interchangeable cross-reference
interchangeable
C12501Interchangeable
interchangeable cross-reference
interchangeable
A-A-900Interchangeable
interchangeable cross-reference
interchangeable
UU-T-81Interchangeable
interchangeable cross-reference
interchangeable
13802PC55Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1250-1SZ28T031?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1250-1SZ28T031?
1250-1SZ28T031 is a HANDLE,BOW.
What parts can replace 1250-1SZ28T031?
There are 12 known substitutes for 1250-1SZ28T031: 12501, 10082457, C12501 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1250-1SZ28T031?
1250-1SZ28T031 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-860-6610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1250-1SZ28T031

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026