PartsTable
Technical Data Sheet
Download PDF

125-3-2-600 — BAND,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

125-3-2-600: BAND,RETAINING.

The BAND,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 1.750 INCHES NOMINAL IN, material: STEEL COMP 301, end_style: LOOP WITH T-BOLT, thickness: 0.020 INCHES NOMINAL IN, loop_radius: 0.164 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-059-9758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125-3-2-600
NSN: 5340-00-059-9758
FSC: 5340 — Hardware, Commercial
CAGE: 54646 — CLAMPCO PRODUCTS, INC. (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
length1.750 INCHES NOMINAL IN
materialSTEEL COMP 301
end_styleLOOP WITH T-BOLT
thickness0.020 INCHES NOMINAL IN
loop_radius0.164 INCHES NOMINAL IN
thread_size10.32
special_featuresT-BOLT ON ONE END 3/16 IN.,ALLOY STEEL,CADMIUM PLATED IN
basic_shape_styleFLAT
specification/standard_data81205-BACC10Q MANUFACTURERS SPECIFICATION
material_document_and_classificationMIL-S-5059, COMP 301, COND 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-059-9758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 125-3-2-600 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.750 INCHES NOMINAL IN
•
END STYLE: LOOP WITH T-BOLT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059, COMP 301, COND 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE
•
LOOP RADIUS: 0.164 INCHES NOMINAL IN
•
BASIC SHAPE STYLE: FLAT
•
SPECIFICATION/STANDARD DATA: 81205-BACC10Q MANUFACTURERS SPECIFICATION
•
THREAD SIZE: 10.32
TECHNICAL CHARACTERISTICS
LENGTH1.750 INCHES NOMINAL IN
END STYLELOOP WITH T-BOLT
END STYLESOLID LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059, COMP 301, COND 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE
LOOP RADIUS0.164 INCHES NOMINAL IN
BASIC SHAPE STYLEFLAT
SPECIFICATION/STANDARD DATA81205-BACC10Q MANUFACTURERS SPECIFICATION
THREAD SIZE10.32
SPECIAL FEATUREST-BOLT ON ONE END 3/16 IN.,ALLOY STEEL,CADMIUM PLATED IN
WIDTH0.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 125-3-2-600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125-3-2-600?
125-3-2-600 is a BAND,RETAINING.
What is the NSN for 125-3-2-600?
125-3-2-600 is cataloged in the U.S. Government catalog under NSN 5340-00-059-9758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125-3-2-600

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.