PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 125-200-14-1-501500
125-200-14-1-501500 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: RECESSED, seal_width: 0.438 INCHES NOMINAL IN, housing_bore_diameter: 2.000 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-068-5445, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125-200-14-1-501500
NSN: 5330-01-068-5445
FSC: 5330
CAGE: 71724 — JOHN CRANE, INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleRECESSED
seal_width0.438 INCHES NOMINAL IN
housing_bore_diameter2.000 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.250 INCHES NOMINAL IN
NSN5330-01-068-5445
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 125-200-14-1-501500 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
•
HOUSING BORE DIAMETER: 2.000 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
HOUSING BORE DIAMETER2.000 INCHES NOMINAL IN
CASE STYLERECESSED
SEALING ELEMENT STYLEANGULAR
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE SEALING ELEMENT A
SEAL WIDTH0.438 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
20-40201Interchangeable
interchangeable cross-reference
interchangeable
50205-1Interchangeable
interchangeable cross-reference
interchangeable
0120-1000-0010Interchangeable
interchangeable cross-reference
interchangeable
57-125-200-14HVTInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 125-200-14-1-501500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125-200-14-1-501500?
125-200-14-1-501500 is a SEAL,PLAIN ENCASED.
What parts can replace 125-200-14-1-501500?
There are 4 known substitutes for 125-200-14-1-501500: 20-40201, 50205-1, 0120-1000-0010 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 125-200-14-1-501500?
125-200-14-1-501500 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-068-5445. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125-200-14-1-501500

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026