PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 125-01
125-01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DRILL,ELECTRIC,PORTABLE is a the manufacturer industrial component. Key specifications include color: WHITE, phase: SINGLE, width: 1.375 INCHES NOMINAL IN, length: 30.0 MILLIMETERS NOMINAL MM, capacity: 5.000 CUBIC CENTIMETERS, material: STEEL CORROSION RESISTING THERMOCOUPLE WIRE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-041-1855, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
125-01
NSN: 5340-00-041-1855
FSC: 5340
CAGE: 00781 — CESSNA AIRCRAFT CO ARC AVIONICS DIV (USA)
SPECIFICATIONS
colorWHITE
phaseSINGLE
width1.375 INCHES NOMINAL IN
length30.0 MILLIMETERS NOMINAL MM
capacity5.000 CUBIC CENTIMETERS
materialSTEEL CORROSION RESISTING THERMOCOUPLE WIRE
thickness1.6 MILLIMETERS NOMINAL MM
point_typeCONVENTIONAL
scale_typeSINGLE
body_length1.000 INCHES MAXIMUM IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
NSN5340-00-041-1855
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 125-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESBUSHING MTD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
10082457Interchangeable
interchangeable cross-reference
interchangeable
C12501Interchangeable
interchangeable cross-reference
interchangeable
12501Interchangeable
interchangeable cross-reference
interchangeable
A-A-900Interchangeable
interchangeable cross-reference
interchangeable
UU-T-81Interchangeable
interchangeable cross-reference
interchangeable
13802PC55Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 125-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 125-01?
125-01 is a DRILL,ELECTRIC,PORTABLE.
What parts can replace 125-01?
There are 12 known substitutes for 125-01: 10082457, C12501, 12501 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 125-01?
125-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-041-1855. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 125-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026