PartsTable
Technical Data Sheet
Download PDF

12488803-001 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12488803-001: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL PROPERTY CLASS 8.8 NUT, nut_style: HEXAGON, nut_height: 4.7 MILLIMETERS MINIMUM AND 5.0 MILLIMETERS MAXIMUM MM, temp_rating: -73.0 CELSIUS MINIMUM AND 120.0 CELSIUS MAXIMUM DEGC, hardness_rating: 30.0 ROCKWELL C MAXIMUM, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-525-1582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12488803-001
NSN: 5310-01-525-1582
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL PROPERTY CLASS 8.8 NUT
nut_styleHEXAGON
nut_height4.7 MILLIMETERS MINIMUM AND 5.0 MILLIMETERS MAXIMUM MM
temp_rating-73.0 CELSIUS MINIMUM AND 120.0 CELSIUS MAXIMUM DEGC
thread_seriesM
hardness_rating30.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
surface_treatmentZINC NUT
width_across_flats6.78 MILLIMETERS MINIMUM AND 7.00 MILLIMETERS MAXIMUM MM
nominal_thread_size4.0 MILLIMETERS MM
bearing_surface_typeFLAT OR CHAMFERED
end_item_identificationARMOR KITS FMTV; FAMILY MEDIUM TACTICAL VEHICLES
NSN5310-01-525-1582
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12488803-001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 6.78 MILLIMETERS MINIMUM AND 7.00 MILLIMETERS MAXIMUM MM
•
THREAD SERIES: M
•
THREAD PITCH IN MILLIMETERS: 0.7
•
TEMP RATING: -73.0 CELSIUS MINIMUM AND 120.0 CELSIUS MAXIMUM DEGC
•
HARDNESS RATING: 30.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 4.0 MILLIMETERS MM
•
NUT HEIGHT: 4.7 MILLIMETERS MINIMUM AND 5.0 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS6.78 MILLIMETERS MINIMUM AND 7.00 MILLIMETERS MAXIMUM MM
THREAD SERIESM
THREAD PITCH IN MILLIMETERS0.7
TEMP RATING-73.0 CELSIUS MINIMUM AND 120.0 CELSIUS MAXIMUM DEGC
HARDNESS RATING30.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE4.0 MILLIMETERS MM
NUT HEIGHT4.7 MILLIMETERS MINIMUM AND 5.0 MILLIMETERS MAXIMUM MM
SURFACE TREATMENTZINC NUT
PART NAME ASSIGNED BY CONTROLLING AGENCYLOCK NUT, NYLON INSERT
SUBSTITUTES & CROSS-REFERENCES 1
12488803Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12488803-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12488803-001?
12488803-001 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 12488803-001?
There is 1 known substitute for 12488803-001: 12488803. Substitute compatibility should be verified for your specific system.
What is the NSN for 12488803-001?
12488803-001 is cataloged in the U.S. Government catalog under NSN 5310-01-525-1582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12488803-001