PartsTable
Technical Data Sheet
Download PDF

12469396 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12469396: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010, overall_width: 6.250 INCHES NOMINAL IN, overall_height: 2.500 INCHES NOMINAL IN, overall_length: 10.040 INCHES NOMINAL IN, special_features: P/N933-0002 IS THE RIGHT SIDE BRACKET, mounting_hole_type: PLAIN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-486-8886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12469396
NSN: 5340-01-486-8886
NIINs: 014868886, 014870292
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1010
overall_width6.250 INCHES NOMINAL IN
overall_height2.500 INCHES NOMINAL IN
overall_length10.040 INCHES NOMINAL IN
special_featuresP/N933-0002 IS THE RIGHT SIDE BRACKET
mounting_hole_typePLAIN
mounting_hole_diameter0.710 INCHES NOMINAL IN
mounting_hole_quantity3
end_item_identification2320-01-412-0143
part_name_assigned_by_controlling_agencyBRACKET ASSEMBLY BUMPER
NSN5340-01-486-8886
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12469396 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 3
•
MOUNTING HOLE DIAMETER: 0.710 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY3
OVERALL HEIGHT2.500 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.710 INCHES NOMINAL IN
OVERALL LENGTH10.040 INCHES NOMINAL IN
OVERALL WIDTH6.250 INCHES NOMINAL IN
SPECIAL FEATURESP/N933-0002 IS THE RIGHT SIDE BRACKET
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET ASSEMBLY BUMPER
END ITEM IDENTIFICATION2320-01-412-0143
MATERIALSTEEL COMP 1010
MOUNTING HOLE TYPEPLAIN
SUBSTITUTES & CROSS-REFERENCES 2
12469396-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
12469696-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12469396?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12469396?
12469396 is a BRACKET,MOUNTING.
What parts can replace 12469396?
There are 2 known substitutes for 12469396: 12469396-1, 12469696-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 12469396?
12469396 is cataloged in the U.S. Government catalog under NSN 5340-01-486-8886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12469396