PartsTable
Technical Data Sheet
Download PDF

12462398 — BOLT ASSEMBLY,CLAMP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12462398: BOLT ASSEMBLY,CLAMP.

The BOLT ASSEMBLY,CLAMP is a the manufacturer industrial component. Key specifications include thread_class: 2A A, thread_length: 2.000 INCHES NOMINAL IN, overall_length: 5.280 INCHES MINIMUM AND 5.340 INCHES MAXIMUM IN, mounting_method: BOLT, special_features: ASSEMBLY INCLUDES;NUT-MS35425-72,ROD-P/N 12462398-1, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-429-2996, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12462398
NSN: 5340-01-429-2996
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
thread_class2A A
thread_length2.000 INCHES NOMINAL IN
overall_length5.280 INCHES MINIMUM AND 5.340 INCHES MAXIMUM IN
mounting_methodBOLT
special_featuresASSEMBLY INCLUDES;NUT-MS35425-72,ROD-P/N 12462398-1
thread_directionRIGHT-HAND
features_providedNUT
surface_treatmentUNABLE TO DECODE
nominal_thread_size0.312 INCHES IN
end_item_identificationMRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 1 OTHER WEAPON SYSTEM
thread_quantity_per_inch18
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-01-429-2996
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12462398 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
MOUNTING METHOD: BOLT
•
THREAD LENGTH: 2.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
FEATURES PROVIDED: NUT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
MOUNTING METHODBOLT
THREAD LENGTH2.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL LENGTH5.280 INCHES MINIMUM AND 5.340 INCHES MAXIMUM IN
FEATURES PROVIDEDNUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
SPECIAL FEATURESASSEMBLY INCLUDES;NUT-MS35425-72,ROD-P/N 12462398-1
SURFACE TREATMENTUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12462398?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12462398?
12462398 is a BOLT ASSEMBLY,CLAMP.
What is the NSN for 12462398?
12462398 is cataloged in the U.S. Government catalog under NSN 5340-01-429-2996. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12462398