PartsTable
Technical Data Sheet
Download PDF

12461132 — CLAMP,BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12461132: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 1.600 INCHES NOMINAL IN, overall_height: 1.393 INCHES NOMINAL IN, overall_length: 6.861 INCHES MINIMUM AND 6.871 INCHES MAXIMUM IN, mounting_facility: UNTHREADED HOLE(S), end_item_identification: 2350-01-219-7577; CARRIER,PERSONNEL,FULL TRACKED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-575-3742, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12461132
NSN: 5340-01-575-3742
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
overall_width1.600 INCHES NOMINAL IN
overall_height1.393 INCHES NOMINAL IN
overall_length6.861 INCHES MINIMUM AND 6.871 INCHES MAXIMUM IN
mounting_facilityUNTHREADED HOLE(S)
mounting_hole_quantity4
end_item_identification2350-01-219-7577; CARRIER,PERSONNEL,FULL TRACKED
part_name_assigned_by_controlling_agencyADAPTER, BACK HALF
NSN5340-01-575-3742
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12461132 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
OVERALL HEIGHT1.393 INCHES NOMINAL IN
OVERALL LENGTH6.861 INCHES MINIMUM AND 6.871 INCHES MAXIMUM IN
OVERALL WIDTH1.600 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
PART NAME ASSIGNED BY CONTROLLING AGENCYADAPTER, BACK HALF
END ITEM IDENTIFICATION2350-01-219-7577; CARRIER,PERSONNEL,FULL TRACKED
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12461132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12461132?
12461132 is a CLAMP,BLOCK.
What is the NSN for 12461132?
12461132 is cataloged in the U.S. Government catalog under NSN 5340-01-575-3742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12461132