PartsTable
Technical Data Sheet
PartsTable / MRO / 1246-9
1246-9 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 1246-9 is a the manufacturer industrial component. Key specifications include peripheral_diameter: 2.125 INCHES NOMINAL IN, center_hole_diameter: 1.250 INCHES NOMINAL IN, cross-sectional_height: 0.438 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-234-0858, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1246-9
NSN: 5999-00-234-0858
FSC: 5999
CAGE: 81312 — WINCHESTER INTERCONNECT CORPORATION DBA WINCHESTER INTERCONNECT DIV WINCHESTER INTERCONNECT (USA)
SPECIFICATIONS
peripheral_diameter2.125 INCHES NOMINAL IN
center_hole_diameter1.250 INCHES NOMINAL IN
cross-sectional_height0.438 INCHES NOMINAL IN
NSN5999-00-234-0858
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 1246-9 MFR 1246-9
KEY FEATURES
•
PRECIOUS MATERIAL AND LOCATION: BODY AND CONTACT SURFACES GOLD
•
TERMINAL TYPE AND QUANTITY: 1 CRIMP AXIALLY AT ONE END
•
SURFACE TREATMENT: GOLD BODY
•
TEST DATA DOCUMENT: 96906-MS18136 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
•
MATERIAL: COPPER ALLOY BODY
•
OVERALL DIAMETER: 0.104 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
RETENTION GROOVE DIAMETER: 0.076 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PRECIOUS MATERIAL AND LOCATIONBODY AND CONTACT SURFACES GOLD
TERMINAL TYPE AND QUANTITY1 CRIMP AXIALLY AT ONE END
SURFACE TREATMENTGOLD BODY
TEST DATA DOCUMENT96906-MS18136 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
MATERIALCOPPER ALLOY BODY
MATERIALCOPPER ALLOY CONTACT
OVERALL DIAMETER0.104 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
RETENTION GROOVE DIAMETER0.076 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
SURFACE TREATMENTGOLD CONTACT
PIN LENGTH0.327 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
1080H38H61Upgraded Successor
successor cross-reference
successor
7228368P006Upgraded Successor
successor cross-reference
successor
204902-0006Upgraded Successor
successor cross-reference
successor
LRC20W-5DB9Upgraded Successor
successor cross-reference
successor
359-0032-020Upgraded Successor
successor cross-reference
successor
579R516H01Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 1246-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1246-9?
1246-9 is a 1246-9. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1246-9?
There are 30 known substitutes for 1246-9: 1080H38H61, 7228368P006, 204902-0006 and 27 more. Substitute compatibility should be verified for your specific system.
Is 1246-9 still available?
1246-9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1246-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026