PartsTable
Technical Data Sheet
Download PDF

12443835 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12443835: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.0 INCHES NOMINAL IN, length: 2.25 INCHES NOMINAL IN, material: STEEL COMP 301 SPRING, hole_diameter: 0.12 INCHES MINIMUM AND 0.13 INCHES MAXIMUM IN, mounting_method: THREADED HOLE(S), overall_diameter: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-728-0446, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12443835
NSN: 5340-01-728-0446
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width1.0 INCHES NOMINAL IN
length2.25 INCHES NOMINAL IN
materialSTEEL COMP 301 SPRING
hole_diameter0.12 INCHES MINIMUM AND 0.13 INCHES MAXIMUM IN
hole_quantity3
mounting_methodTHREADED HOLE(S)
overall_diameter0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
material_thickness0.020 INCHES NOMINAL IN
end_item_identification2355-01-654-5321
material_document_and_classificationASTM A666 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE SPRING
part_name_assigned_by_controlling_agencyCLIP, SPRING
NSN5340-01-728-0446
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12443835 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.25 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A666 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE SPRING
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
WIDTH: 1.0 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH2.25 INCHES NOMINAL IN
OVERALL DIAMETER0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
MOUNTING METHODTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A666 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE SPRING
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
WIDTH1.0 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCLIP, SPRING
END ITEM IDENTIFICATION2355-01-654-5321
MATERIALSTEEL COMP 301 SPRING
HOLE QUANTITY3
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12443835?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12443835?
12443835 is a CLIP,SPRING TENSION.
What is the NSN for 12443835?
12443835 is cataloged in the U.S. Government catalog under NSN 5340-01-728-0446. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12443835