PartsTable
Technical Data Sheet
Download PDF

12443626 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12443626: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, fork_depth: 1.810 INCHES NOMINAL IN, hole_shape: ROUND, hole_diameter: 0.380 INCHES NOMINAL IN, overall_width: 1.360 INCHES NOMINAL IN, shank_diameter: 0.420 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-500-6076, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12443626
NSN: 5340-01-500-6076
FSC: 5340 — Hardware, Commercial
CAGE: 75535 — THE CROSBY GROUP LLC DBA THE CROSBY GROUP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
fork_depth1.810 INCHES NOMINAL IN
hole_shapeROUND
hole_diameter0.380 INCHES NOMINAL IN
overall_width1.360 INCHES NOMINAL IN
shank_diameter0.420 INCHES NOMINAL IN
fork_span_width0.680 INCHES NOMINAL IN
style_designatorCLEVIS
fork_arm_thickness0.340 INCHES NOMINAL IN
end_item_identification2330-01-449-1776
distance_from_pivot_pinhole_center_to_rod_connection_end5.940 INCHES NOMINAL IN
NSN5340-01-500-6076
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12443626 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.420 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.680 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.340 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
HOLE SHAPE: ROUND
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.420 INCHES NOMINAL IN
FORK SPAN WIDTH0.680 INCHES NOMINAL IN
FORK ARM THICKNESS0.340 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH1.360 INCHES NOMINAL IN
HOLE SHAPEROUND
END ITEM IDENTIFICATION2330-01-449-1776
MATERIALSTEEL OVERALL
FORK DEPTH1.810 INCHES NOMINAL IN
HOLE DIAMETER0.380 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
1072350Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12443626?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12443626?
12443626 is a CLEVIS,ROD END.
What parts can replace 12443626?
There is 1 known substitute for 12443626: 1072350. Substitute compatibility should be verified for your specific system.
What is the NSN for 12443626?
12443626 is cataloged in the U.S. Government catalog under NSN 5340-01-500-6076. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12443626

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.