PartsTable
Technical Data Sheet
Download PDF

12442-A-3774-2 — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12442-A-3774-2: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include width: 0.6250 INCHES NOMINAL IN, length: 2.2190 INCHES MINIMUM AND 4.2970 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 6063 OVERALL, shaft_length: 2.7500 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.6250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-448-0544, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12442-A-3774-2
NSN: 5340-01-448-0544
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
width0.6250 INCHES NOMINAL IN
length2.2190 INCHES MINIMUM AND 4.2970 INCHES MAXIMUM IN
materialALUMINUM ALLOY 6063 OVERALL
shaft_length2.7500 INCHES NOMINAL IN
thread_class2A A
thread_length0.6250 INCHES NOMINAL IN
overall_height2.0940 INCHES MINIMUM AND 2.1720 INCHES MAXIMUM IN
stock_diameter0.3750 INCHES NOMINAL IN
mounting_methodTHREADED SHAFT
style_designatorRECTANGULAR SWIVEL
thread_directionRIGHT-HAND
square_shaft_width0.6250 INCHES NOMINAL IN
NSN5340-01-448-0544
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12442-A-3774-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTEGRAL SHAFT STYLE: THREADED
•
MOUNTING FACILITY QUANTITY: 2
•
LENGTH: 2.2190 INCHES MINIMUM AND 4.2970 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: THREADED SHAFT
•
THREAD LENGTH: 0.6250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR SWIVEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.0940 INCHES MINIMUM AND 2.1720 INCHES MAXIMUM IN
INTEGRAL SHAFT STYLETHREADED
MOUNTING FACILITY QUANTITY2
LENGTH2.2190 INCHES MINIMUM AND 4.2970 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625, TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODTHREADED SHAFT
THREAD LENGTH0.6250 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR SWIVEL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/9, T5 OR T52SFTT2BADANA000 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 2
R3475-F04Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
74B059753Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12442-A-3774-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12442-A-3774-2?
12442-A-3774-2 is a HANDLE,BAIL.
What parts can replace 12442-A-3774-2?
There are 2 known substitutes for 12442-A-3774-2: R3475-F04, 74B059753. Substitute compatibility should be verified for your specific system.
What is the NSN for 12442-A-3774-2?
12442-A-3774-2 is cataloged in the U.S. Government catalog under NSN 5340-01-448-0544. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12442-A-3774-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.