PartsTable
Technical Data Sheet
Download PDF

124341 — BRACKET,COMPONENT CLIP

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

124341: BRACKET,COMPONENT CLIP.

The BRACKET,COMPONENT CLIP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: HEXAGON, head_height: 0.153 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.650 INCHES MINIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-121-2996, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 124341
NSN: 5305-00-121-2996
NIINs: 001212996, 001805406, 005252825, 005469909, 010366487, 015745655
FSC: 5305 — Screws
CAGE: 1UVT5 — BRP US INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleHEXAGON
head_height0.153 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class3A A
thread_length0.650 INCHES MINIMUM IN
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
end_item_identificationLIGHTWEIGHT COUNTER MORTAR RADAR (LCMR)
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch20
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-121-2996
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 124341 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.153 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.650 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
THREAD CLASS: 3A A
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.153 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.650 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
THREAD CLASS3A A
THREAD QUANTITY PER INCH20
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
300630Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 124341?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 124341?
124341 is a BRACKET,COMPONENT CLIP. It is classified as a MRO (MRO_GENERAL).
What parts can replace 124341?
There is 1 known substitute for 124341: 300630. Substitute compatibility should be verified for your specific system.
What is the NSN for 124341?
124341 is cataloged in the U.S. Government catalog under NSN 5305-00-121-2996. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 124341

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.