PartsTable
Technical Data Sheet
Download PDF

124256 — CONTROL,ANTENNA

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

124256: CONTROL,ANTENNA.

The CONTROL,ANTENNA is a the manufacturer industrial component. Key specifications include hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.660 INCHES NOMINAL IN, overall_length: 2.660 INCHES NOMINAL IN, special_features: ANTENNAS, WAVEGUIDE, AND RELATED EQUIPMENT, aperture_diameter: 1.410 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-819-4566, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
124256
NSN: 5330-00-819-4566
NIINs: 008194566, 013971347, 015840318
FSC: 5330 — Packing and Gasket Materials
CAGE: 45681 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CORPORATE HEADQUARTERS (USA)
SPECIFICATIONS
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.660 INCHES NOMINAL IN
overall_length2.660 INCHES NOMINAL IN
special_featuresANTENNAS, WAVEGUIDE, AND RELATED EQUIPMENT
aperture_diameter1.410 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
gage_ring_thickness0.080 INCHES NOMINAL IN
fsc_application_dataFUEL LINES,FABRICATED,AIRFRAME
outside_corner_radius0.520 INCHES NOMINAL IN
end_item_identificationW/S: AIRCRAFT, PHANTOM F-4; F4S AIRCRAFT, F4N AIRCRAFT; CONSOLIDATED TARGETS
cross-sectional_thickness0.120 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
NSN5330-00-819-4566
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 124256 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: FUEL LINES,FABRICATED,AIRFRAME
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES NOMINAL IN
•
GAGE RING THICKNESS: 0.080 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
APERTURE DIAMETER: 1.410 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAFUEL LINES,FABRICATED,AIRFRAME
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.120 INCHES NOMINAL IN
GAGE RING THICKNESS0.080 INCHES NOMINAL IN
OVERALL LENGTH2.660 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL WIDTH2.660 INCHES NOMINAL IN
APERTURE DIAMETER1.410 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.620 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SURFACE TREATMENTANODIZE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
S8P492Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 124256?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 124256?
124256 is a CONTROL,ANTENNA.
What parts can replace 124256?
There is 1 known substitute for 124256: S8P492. Substitute compatibility should be verified for your specific system.
What is the NSN for 124256?
124256 is cataloged in the U.S. Government catalog under NSN 5330-00-819-4566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 124256

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.