PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12423363-001
12423363-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,ROD RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL, overall_length: 0.750 INCHES NOMINAL IN, special_features: LEFT HAND ROD CLIP STAMPED WITH 4L AND RIGHT HAND ROD CLIP STAMPED 4R, style_designator: END CLASP, end_item_identification: NSN: 2320-01-447-6345; TRUCK CHASSIS, accommodated_rod_diameter: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-522-0393, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12423363-001
NSN: 5340-01-522-0393
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
overall_length0.750 INCHES NOMINAL IN
special_featuresLEFT HAND ROD CLIP STAMPED WITH 4L AND RIGHT HAND ROD CLIP STAMPED 4R
style_designatorEND CLASP
end_item_identificationNSN: 2320-01-447-6345; TRUCK CHASSIS
accommodated_rod_diameter0.188 INCHES NOMINAL IN
NSN5340-01-522-0393
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12423363-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: END CLASP
•
MATERIAL: STEEL
•
ACCOMMODATED ROD DIAMETER: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOREND CLASP
MATERIALSTEEL
SPECIAL FEATURESLEFT HAND ROD CLIP STAMPED WITH 4L AND RIGHT HAND ROD CLIP STAMPED 4R
ACCOMMODATED ROD DIAMETER0.188 INCHES NOMINAL IN
OVERALL LENGTH0.750 INCHES NOMINAL IN
END ITEM IDENTIFICATIONNSN: 2320-01-447-6345; TRUCK CHASSIS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
8108100Interchangeable
interchangeable cross-reference
interchangeable
SD2514-2Interchangeable
interchangeable cross-reference
interchangeable
SMB209429-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12423363-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12423363-001?
12423363-001 is a CLIP,ROD RETAINER.
What parts can replace 12423363-001?
There are 3 known substitutes for 12423363-001: 8108100, SD2514-2, SMB209429-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 12423363-001?
12423363-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-522-0393. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12423363-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026