PartsTable
Technical Data Sheet
Download PDF

12422577 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12422577: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, thickness: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN, hole_diameter: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, overall_diameter: 0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-493-6806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12422577
NSN: 5310-01-493-6806
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER OVERALL
thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
hole_diameter0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
overall_diameter0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification2320-01-353-9098, FMTV
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-493-6806
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12422577 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: RUBBER OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATION2320-01-353-9098, FMTV
MATERIALRUBBER OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
12422533Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12422577?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12422577?
12422577 is a WASHER,FLAT.
What parts can replace 12422577?
There is 1 known substitute for 12422577: 12422533. Substitute compatibility should be verified for your specific system.
What is the NSN for 12422577?
12422577 is cataloged in the U.S. Government catalog under NSN 5310-01-493-6806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12422577