PartsTable
Technical Data Sheet
Download PDF

12416467 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12416467: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, minor_width: 0.969 INCHES NOMINAL0.969 INCHES NOMINAL IN, construction: ONE-PIECEONE-PIECE, minor_height: 0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM0.625 INCHES MAXIMUM IN, overall_length: 2.500 INCHES NOMINAL2.500 INCHES NOMINAL IN, hardness_rating: 85.0 SHORE DUROMETER A NOMINAL OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-385-3769, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12416467
NSN: 5330-01-385-3769
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
minor_width0.969 INCHES NOMINAL0.969 INCHES NOMINAL IN
constructionONE-PIECEONE-PIECE
minor_height0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM0.625 INCHES MAXIMUM IN
overall_length2.500 INCHES NOMINAL2.500 INCHES NOMINAL IN
hardness_rating85.0 SHORE DUROMETER A NOMINAL OVERALL
style_designatorSTRIP
cross-sectional_width1.094 INCHES MINIMUM AND 1.094 INCHES MINIMUM AND 1.109 INCHES MAXIMUM1.109 INCHES MAXIMUM IN
cross-sectional_height1.000 INCHES MINIMUM AND 1.000 INCHES MINIMUM AND 1.015 INCHES MAXIMUM1.015 INCHES MAXIMUM IN
material_document_and_classificationMIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-385-3769
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12416467 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 1.000 INCHES MINIMUM AND 1.000 INCHES MINIMUM AND 1.015 INCHES MAXIMUM1.015 INCHES MAXIMUM IN
•
CROSS-SECTIONAL WIDTH: 1.094 INCHES MINIMUM AND 1.094 INCHES MINIMUM AND 1.109 INCHES MAXIMUM1.109 INCHES MAXIMUM IN
•
HARDNESS RATING: 85.0 SHORE DUROMETER A NOMINAL OVERALL
•
MINOR HEIGHT: 0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM0.625 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MINOR WIDTH: 0.969 INCHES NOMINAL0.969 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT1.000 INCHES MINIMUM AND 1.000 INCHES MINIMUM AND 1.015 INCHES MAXIMUM1.015 INCHES MAXIMUM IN
CROSS-SECTIONAL WIDTH1.094 INCHES MINIMUM AND 1.094 INCHES MINIMUM AND 1.109 INCHES MAXIMUM1.109 INCHES MAXIMUM IN
HARDNESS RATING85.0 SHORE DUROMETER A NOMINAL OVERALL
MINOR HEIGHT0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM0.625 INCHES MAXIMUM IN
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.500 INCHES NOMINAL2.500 INCHES NOMINAL IN
MINOR WIDTH0.969 INCHES NOMINAL0.969 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
CONSTRUCTIONONE-PIECEONE-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12416467?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12416467?
12416467 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What is the NSN for 12416467?
12416467 is cataloged in the U.S. Government catalog under NSN 5330-01-385-3769. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12416467

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.