PartsTable
Technical Data Sheet
Download PDF

124150 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

124150: RESISTOR,FIXED,WIRE WOUND.

- This removable storage medium allows data to be written and erased as many times as is required - For real-time/broadcast recording; allows fast and direct data transfer between a memory card and a UHS-I capable terminal device - micro SecureDigital High Capacity Card (microSDHC), complies with new SD 3.01 specifications - Especially suited for real-time full HD video and 3D video recording - Adapter for SD card format included This part is cataloged in the U.S. Government catalog under NSN 5305-00-012-4150, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 124150
NSN: 5305-00-012-4150
NIINs: 000124150, 013847680
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.281 INCHES NOMINAL IN
thread_class2A A
thread_length1.125 INCHES MINIMUM IN
fastener_length2.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_between_flats0.625 INCHES NOMINAL IN
electrical_resistance15.000 OHMS
nominal_thread_diameter0.438 INCHES IN
thread_quantity_per_inch20
NSN5305-00-012-4150
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 124150 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.281 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.750 INCHES NOMINAL IN
•
THREAD LENGTH: 1.125 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 1 OR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.438 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.281 INCHES NOMINAL IN
FASTENER LENGTH2.750 INCHES NOMINAL IN
THREAD LENGTH1.125 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 1 OR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.438 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.625 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
FFS85TYPE2STYLE10PReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 124150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 124150?
124150 is a RESISTOR,FIXED,WIRE WOUND manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 124150?
There is 1 known substitute for 124150: FFS85TYPE2STYLE10P. Substitute compatibility should be verified for your specific system.
What is the NSN for 124150?
124150 is cataloged in the U.S. Government catalog under NSN 5305-00-012-4150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 124150

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.