124139: BEARING,BALL,ANNULAR.
The BEARING,BALL,ANNULAR is a Oral-B industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 17.8 MILLIMETERS NOMINAL MM, overall_length: 34.0 MILLIMETERS NOMINAL MM, overall_diameter: 36.0 MILLIMETERS NOMINAL MM, end_item_identification: GPC1-10000-AF,GAS PRESSURE CONTROLLER,NSN 6685-01-529-6990., part_name_assigned_by_controlling_agency: BULKHEAD UNION,DH500F/HF2. This part is cataloged in the U.S.
Government catalog under NSN 3110-00-891-5338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL CORROSION RESISTING |
| overall_width | 17.8 MILLIMETERS NOMINAL MM |
| overall_length | 34.0 MILLIMETERS NOMINAL MM |
| overall_diameter | 36.0 MILLIMETERS NOMINAL MM |
| special_features | 1.20MM WEEPHOLE THRU CENTER,BOLT HOLE CENTER TO CENTER ON FLANGE IS 26MM,FROM FLANGE BHC TO SHAFT CENTER IS13MM,TWO BH 4.30 THRU,BOTH ENDS OF PIPE HAVE DIFFERENT CUT IN MEASUREMENTS. MM |
| end_item_identification | GPC1-10000-AF,GAS PRESSURE CONTROLLER,NSN 6685-01-529-6990. |
| part_name_assigned_by_controlling_agency | BULKHEAD UNION,DH500F/HF2 |
| NSN | 3110-00-891-5338 |
| RETAINER FABRICATION METHOD | PRESSED |
| LUBRICATION MATERIAL | OIL |
| OUTER RING WIDTH | 0.0937 INCHES NOMINAL IN |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| FLANGE OUTSIDE DIAMETER | 0.2960 INCHES NOMINAL IN |
| SURFACE FINISH | GROUND |
| OVERALL WIDTH | 0.1250 INCHES NOMINAL IN |
| BORE SHAPE | STRAIGHT |
| LOAD DIRECTION | RADIAL |
| FLANGE WIDTH | 0.0310 INCHES NOMINAL IN |
No substitute or cross-reference records for this part.