PartsTable
Technical Data Sheet
Download PDF

12413106-05 — CLAMP,BLOCK,SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12413106-05: CLAMP,BLOCK,SECTION.

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: PLASTIC, block_height: 0.670 INCHES NOMINAL0.670 INCHES NOMINAL IN, overall_width: 1.190 INCHES NOMINAL1.190 INCHES NOMINAL IN, overall_length: 1.880 INCHES NOMINAL1.880 INCHES NOMINAL IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-446-1612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12413106-05
NSN: 5340-01-446-1612
FSC: 5340 — Hardware, Commercial
CAGE: 0FW39 — BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP DBA DATA SYSTEMS INTERNATIONAL INC (USA)
SPECIFICATIONS
materialPLASTIC
block_height0.670 INCHES NOMINAL0.670 INCHES NOMINAL IN
overall_width1.190 INCHES NOMINAL1.190 INCHES NOMINAL IN
overall_length1.880 INCHES NOMINAL1.880 INCHES NOMINAL IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter0.750 INCHES NOMINAL SINGLE HOLE IN
clamping_hole_quantity11
distance_from_end_to_first_clamping_hole_center0.940 INCHES NOMINAL IN
distance_from_end_to_first_mounting_hole_center0.290 INCHES NOMINAL IN
distance_from_center_of_mounting_hole_to_edge_along_the_width0.590 INCHES NOMINAL0.590 INCHES NOMINAL IN
NSN5340-01-446-1612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12413106-05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLAMPING HOLE QUANTITY: 11
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.940 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.670 INCHES NOMINAL0.670 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
CLAMPING HOLE DIAMETER: 0.750 INCHES NOMINAL SINGLE HOLE IN
•
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH: 0.590 INCHES NOMINAL0.590 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CLAMPING HOLE QUANTITY11
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.940 INCHES NOMINAL IN
BLOCK HEIGHT0.670 INCHES NOMINAL0.670 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
OVERALL LENGTH1.880 INCHES NOMINAL1.880 INCHES NOMINAL IN
OVERALL WIDTH1.190 INCHES NOMINAL1.190 INCHES NOMINAL IN
CLAMPING HOLE DIAMETER0.750 INCHES NOMINAL SINGLE HOLE IN
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH0.590 INCHES NOMINAL0.590 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER0.290 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)UNTHREADED HOLE(S)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
CLH-03-S-075Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12413106-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12413106-05?
12413106-05 is a CLAMP,BLOCK,SECTION.
What parts can replace 12413106-05?
There is 1 known substitute for 12413106-05: CLH-03-S-075. Substitute compatibility should be verified for your specific system.
What is the NSN for 12413106-05?
12413106-05 is cataloged in the U.S. Government catalog under NSN 5340-01-446-1612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12413106-05

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.