The BUMPER is a the manufacturer industrial component. Key specifications include material: STEEL AND RUBBER, overall_width: 2.000 INCHES NOMINAL IN, overall_height: 0.500 INCHES NOMINAL IN, overall_length: 5.000 INCHES NOMINAL IN, special_features: INCLUDES TWO HOLES,0.667 IN. MIN AND 0.707 IN.
MAX DIA IN, style_designator: RECTANGULAR. This part is cataloged in the U.S. Government catalog under NSN 5340-01-371-5169, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
12412466
NSN:5340-01-371-5169 FSC:5340 — Hardware, Commercial CAGE:19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
material
STEEL AND RUBBER
overall_width
2.000 INCHES NOMINAL IN
overall_height
0.500 INCHES NOMINAL IN
overall_length
5.000 INCHES NOMINAL IN
special_features
INCLUDES TWO HOLES,0.667 IN. MIN AND 0.707 IN. MAX DIA IN
style_designator
RECTANGULAR
end_item_identification
M1089A1P2 (WRECKER) AND M1089/AI/AIR (WRECKER)
material_hardness_rating
60.0 DUROMETER MINIMUM AND 70.0 DUROMETER MAXIMUM
part_name_assigned_by_controlling_agency
CUSHION, TOOL BOX
NSN
5340-01-371-5169
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL HARDNESS RATING: 60.0 DUROMETER MINIMUM AND 70.0 DUROMETER MAXIMUM
•
SUPPLEMENTARY FEATURES: MATERIAL: RUBBER, STYRENE BUTADIENE RUBBER (SBR) I/A/W ASTM D2000, M2AA610A13Z1; ZI HARDNESS: 55-70 SHORE DUROMETER; .50" THICK; STEEL: ASTM A569/569N, SHEET, HOT ROLLED, .060" THICK (16 GA); RUBBER AND STEEL ARE BONDED TOGETHER WHEREAS THE ASSEMBLY SHALL MEET A MINIMUM PEEL STRENGTH OF 100LBS/LINEAR INCH; BONDED RUBBER/STEEL ASSY IS CALLED A BULK MATERIAL SUPPLIED IN VARIOUS SHEET SIZES AS DETERMINED BY MANUFACTURE; FINAL PROTECTIVE FINISH I/A/W 12420325 METHOD 4 FOR STEEL ITEM ONLY LBS
•
STYLE DESIGNATOR: RECTANGULAR
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.500 INCHES NOMINAL IN
MATERIAL HARDNESS RATING
60.0 DUROMETER MINIMUM AND 70.0 DUROMETER MAXIMUM
SUPPLEMENTARY FEATURES
MATERIAL: RUBBER, STYRENE BUTADIENE RUBBER (SBR) I/A/W ASTM D2000, M2AA610A13Z1; ZI HARDNESS: 55-70 SHORE DUROMETER; .50" THICK; STEEL: ASTM A569/569N, SHEET, HOT ROLLED, .060" THICK (16 GA); RUBBER AND STEEL ARE BONDED TOGETHER WHEREAS THE ASSEMBLY SHALL MEET A MINIMUM PEEL STRENGTH OF 100LBS/LINEAR INCH; BONDED RUBBER/STEEL ASSY IS CALLED A BULK MATERIAL SUPPLIED IN VARIOUS SHEET SIZES AS DETERMINED BY MANUFACTURE; FINAL PROTECTIVE FINISH I/A/W 12420325 METHOD 4 FOR STEEL ITEM ONLY LBS
STYLE DESIGNATOR
RECTANGULAR
OVERALL LENGTH
5.000 INCHES NOMINAL IN
OVERALL WIDTH
2.000 INCHES NOMINAL IN
SPECIAL FEATURES
INCLUDES TWO HOLES,0.667 IN. MIN AND 0.707 IN. MAX DIA IN
PART NAME ASSIGNED BY CONTROLLING AGENCY
CUSHION, TOOL BOX
END ITEM IDENTIFICATION
M1089A1P2 (WRECKER) AND M1089/AI/AIR (WRECKER)
MATERIAL
STEEL AND RUBBER
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12412466?
12412466 is a BUMPER.
What is the NSN for 12412466?
12412466 is cataloged in the U.S. Government catalog under NSN 5340-01-371-5169. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.