PartsTable
Technical Data Sheet
Download PDF

12410369-1 — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12410369-1: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.030 INCHES NOMINAL IN, material: ALUMINUM ALLOY MOUNTING FLANGE PLATE, load_rating: 9.0 POUNDS MAXIMUM LBS, flange_width: 1.250 INCHES NOMINAL IN, flange_length: 1.875 INCHES NOMINAL IN, inside_diameter: 0.165 INCHES MINIMUM AND 0.168 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-153-1283, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12410369-1
NSN: 5340-01-153-1283
FSC: 5340 — Hardware, Commercial
CAGE: F6151 — SAFRAN (FRA)
SPECIFICATIONS
height1.030 INCHES NOMINAL IN
materialALUMINUM ALLOY MOUNTING FLANGE PLATE
load_rating9.0 POUNDS MAXIMUM LBS
flange_width1.250 INCHES NOMINAL IN
flange_length1.875 INCHES NOMINAL IN
inside_diameter0.165 INCHES MINIMUM AND 0.168 INCHES MAXIMUM IN
flange_thickness0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
special_featuresHOLES SLOTTED 0.118-0.123 IN. BY 0.215 IN.; MATCHED SET,4 ISOLATORS,SET SHALL BE FABRICATED USING SAME ELASTOMER LOT; INERTIAL PLATFORM ASSEMBLY,MX-9923/A IN
style_designatorROUND W/BUSHING TWO-HOLE FLANGE
surface_treatmentCHROMATE MOUNTING FLANGE PLATE
distance_from_flange_to_end0.450 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/4, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE MOUNTING FLANGE PLATE
NSN5340-01-153-1283
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12410369-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE MOUNTING FLANGE PLATE
•
LOAD RATING: 9.0 POUNDS MAXIMUM LBS
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.464 INCHES MINIMUM AND 1.474 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND W/BUSHING TWO-HOLE FLANGE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BOLT
•
FLANGE LENGTH: 1.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE MOUNTING FLANGE PLATE
LOAD RATING9.0 POUNDS MAXIMUM LBS
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.464 INCHES MINIMUM AND 1.474 INCHES MAXIMUM IN
FLANGE THICKNESS0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
STYLE DESIGNATORROUND W/BUSHING TWO-HOLE FLANGE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BOLT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE MOUNTING FLANGE PLATE
FLANGE LENGTH1.875 INCHES NOMINAL IN
DISTANCE FROM FLANGE TO END0.450 INCHES NOMINAL IN
INSIDE DIAMETER0.165 INCHES MINIMUM AND 0.168 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
93015-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A410A011-105Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12410369-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12410369-1?
12410369-1 is a MOUNT,RESILIENT,UTILITY.
What parts can replace 12410369-1?
There are 2 known substitutes for 12410369-1: 93015-2, A410A011-105. Substitute compatibility should be verified for your specific system.
What is the NSN for 12410369-1?
12410369-1 is cataloged in the U.S. Government catalog under NSN 5340-01-153-1283. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12410369-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.