PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 124001-4CR0134
124001-4CR0134 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, exterior_color: NATURAL, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4710-00-718-0832, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
124001-4CR0134
NSN: 4710-00-718-0832
FSC: 4710
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
exterior_colorNATURAL
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.304 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
thread_directionRIGHT-HAND FIRST END
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure12000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.437 INCHES FIRST END IN
NSN4710-00-718-0832
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 124001-4CR0134 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
536645Interchangeable
interchangeable cross-reference
interchangeable
108420Interchangeable
interchangeable cross-reference
interchangeable
VT3435Interchangeable
interchangeable cross-reference
interchangeable
33001Interchangeable
interchangeable cross-reference
interchangeable
48-242Interchangeable
interchangeable cross-reference
interchangeable
2140053Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 124001-4CR0134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 124001-4CR0134?
124001-4CR0134 is a MICROCIRCUIT,DIGITAL.
What parts can replace 124001-4CR0134?
There are 21 known substitutes for 124001-4CR0134: 536645, 108420, VT3435 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 124001-4CR0134?
124001-4CR0134 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4710-00-718-0832. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 124001-4CR0134

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026