PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 124-6293626 PC 82
124-6293626 PC 82 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,THREADED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thread_class: 2A A, thread_length: 0.750 INCHES NOMINAL IN, first_end_style: CHAMFERED, pin_grip_length: 3.125 INCHES NOMINAL IN, special_features: SHANK END .03 RADIUS UNDERCUT TO ROOT DIAMETER OF PIN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-473-0904, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
124-6293626 PC 82
NSN: 5315-01-473-0904
FSC: 5315
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thread_class2A A
thread_length0.750 INCHES NOMINAL IN
first_end_styleCHAMFERED
pin_grip_length3.125 INCHES NOMINAL IN
special_featuresSHANK END .03 RADIUS UNDERCUT TO ROOT DIAMETER OF PIN
thread_directionRIGHT-HAND
first_end_locationTHREADED END
pin_overall_length5.625 INCHES NOMINAL IN
nominal_thread_size0.750 INCHES IN
pin_overall_diameter1.0000 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-01-473-0904
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 124-6293626 PC 82 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
FIRST END LOCATION: THREADED END
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SUPPLEMENTARY FEATURES: ITEM IS EXTERNALLY THREADED ON FIRST END;SMALL SHOULDER OF FIRST END 0.250 INCHES;SHANK OF PIN OFF SHOULDER 3 1/8 IN LONG;ITEM IS HEADED;1 1/2 IN HIGH AND 1.5 INCHES DIAMETER;HEAD HAS A 45 DEGREE ANGLE .5 INCHES INTO DIAMETER;1/4 DIAMETER THRU HOLE 3/8 FROM BOTTOM OF HEAD IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
NOMINAL THREAD SIZE0.750 INCHES IN
FIRST END LOCATIONTHREADED END
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
THREAD LENGTH0.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SUPPLEMENTARY FEATURESITEM IS EXTERNALLY THREADED ON FIRST END;SMALL SHOULDER OF FIRST END 0.250 INCHES;SHANK OF PIN OFF SHOULDER 3 1/8 IN LONG;ITEM IS HEADED;1 1/2 IN HIGH AND 1.5 INCHES DIAMETER;HEAD HAS A 45 DEGREE ANGLE .5 INCHES INTO DIAMETER;1/4 DIAMETER THRU HOLE 3/8 FROM BOTTOM OF HEAD IN
MATERIALSTEEL CORROSION RESISTING OVERALL
PIN GRIP LENGTH3.125 INCHES NOMINAL IN
END ITEM IDENTIFICATIONSCUTTLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
124-5589897 PC 58Interchangeable
interchangeable cross-reference
interchangeable
88-20560Interchangeable
interchangeable cross-reference
interchangeable
B18.2.2Interchangeable
interchangeable cross-reference
interchangeable
6293626Interchangeable
interchangeable cross-reference
interchangeable
124-6293626 PC 66Interchangeable
interchangeable cross-reference
interchangeable
124-6293626 PC 85Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 124-6293626 PC 82?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 124-6293626 PC 82?
124-6293626 PC 82 is a PIN,STRAIGHT,THREADED.
What parts can replace 124-6293626 PC 82?
There are 12 known substitutes for 124-6293626 PC 82: 124-5589897 PC 58, 88-20560, B18.2.2 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 124-6293626 PC 82?
124-6293626 PC 82 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-473-0904. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 124-6293626 PC 82

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026