PartsTable
Technical Data Sheet
Download PDF

124-4322613 PC 15 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

124-4322613 PC 15: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include radius: 1.000 INCHES NOMINAL IN, material: STEEL OVERALL, hole_shape: ROUND, thread_class: 2A ROD END A, tongue_width: 2.000 INCHES NOMINAL IN, hole_diameter: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-474-8164, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
124-4322613 PC 15
NSN: 5340-01-474-8164
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
radius1.000 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_shapeROUND
thread_class2A ROD END A
tongue_width2.000 INCHES NOMINAL IN
hole_diameter0.625 INCHES NOMINAL IN
thread_length2.375 INCHES NOMINAL ROD END IN
special_featuresHOLE IN TONGUE THREADED 5/8-11 UNC-2B. MIL-S-22698 S/S BY ASTM A505. USED ON BALLISTIC DOOR
style_designatorCONNECTOR
thread_directionLEFT-HAND ROD END
tongue_thickness0.500 INCHES NOMINAL IN
surface_treatmentPAINT OVERALL
NSN5340-01-474-8164
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 124-4322613 PC 15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE THICKNESS: 0.500 INCHES NOMINAL IN
•
TONGUE WIDTH: 2.000 INCHES NOMINAL IN
•
RADIUS: 1.000 INCHES NOMINAL IN
•
THREAD LENGTH: 2.375 INCHES NOMINAL ROD END IN
•
STYLE DESIGNATOR: CONNECTOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-22698 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: LEFT-HAND ROD END
•
NOMINAL THREAD SIZE: 0.875 INCHES ROD END IN
TECHNICAL CHARACTERISTICS
TONGUE THICKNESS0.500 INCHES NOMINAL IN
TONGUE WIDTH2.000 INCHES NOMINAL IN
RADIUS1.000 INCHES NOMINAL IN
THREAD LENGTH2.375 INCHES NOMINAL ROD END IN
STYLE DESIGNATORCONNECTOR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-22698 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONLEFT-HAND ROD END
NOMINAL THREAD SIZE0.875 INCHES ROD END IN
HOLE SHAPEROUND
SPECIAL FEATURESHOLE IN TONGUE THREADED 5/8-11 UNC-2B. MIL-S-22698 S/S BY ASTM A505. USED ON BALLISTIC DOOR
SUBSTITUTES & CROSS-REFERENCES 3
124-4322612 PC 30Reference document
Same NSN cross-reference
Reference document — Secondary reference
4322613Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
4322612Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 124-4322613 PC 15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 124-4322613 PC 15?
124-4322613 PC 15 is a CONNECTOR,ROD END.
What parts can replace 124-4322613 PC 15?
There are 3 known substitutes for 124-4322613 PC 15: 124-4322612 PC 30, 4322613, 4322612. Substitute compatibility should be verified for your specific system.
What is the NSN for 124-4322613 PC 15?
124-4322613 PC 15 is cataloged in the U.S. Government catalog under NSN 5340-01-474-8164. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 124-4322613 PC 15

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.