PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 124-1900973 PART NO. 50
124-1900973 PART NO. 50 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The 124-1900973 PART NO. 50 is a the manufacturer industrial component. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-349-4088, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
124-1900973 PART NO. 50
NSN: 5310-01-349-4088
FSC: 5310
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
Part Number124-1900973 PART NO. 50
NSN5310-01-349-4088
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 124-1900973 PART NO. 50 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
THREAD DIRECTION: RIGHT-HAND
•
MATERIAL: COPPER ALLOY 462 OR COPPER ALLOY 464 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B21,H04 ASSN STD 1ST MATERIAL RESPONSE OR ASTM B21,H02 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD QUANTITY PER INCH: 9
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
THREAD DIRECTIONRIGHT-HAND
MATERIALCOPPER ALLOY 462 OR COPPER ALLOY 464 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B21,H04 ASSN STD 1ST MATERIAL RESPONSE OR ASTM B21,H02 ASSN STD 2ND MATERIAL RESPONSE OVERALL
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD QUANTITY PER INCH9
NOMINAL THREAD SIZE0.875 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NUT HEIGHT0.724 INCHES MINIMUM AND 0.776 INCHES MAXIMUM IN
NUT STYLEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
1900973Interchangeable
interchangeable cross-reference
interchangeable
124-1900973 PART NO. 42Interchangeable
interchangeable cross-reference
interchangeable
124-5589510 PC 7Interchangeable
interchangeable cross-reference
interchangeable
124-1900973 PART NO. 21Interchangeable
interchangeable cross-reference
interchangeable
124-1900973 PART NO. 51Interchangeable
interchangeable cross-reference
interchangeable
124-1900973 PART N0. 26Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 124-1900973 PART NO. 50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 124-1900973 PART NO. 50?
124-1900973 PART NO. 50 is a 124-1900973 PART NO. 50.
What parts can replace 124-1900973 PART NO. 50?
There are 6 known substitutes for 124-1900973 PART NO. 50: 1900973, 124-1900973 PART NO. 42, 124-5589510 PC 7 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 124-1900973 PART NO. 50?
124-1900973 PART NO. 50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-349-4088. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 124-1900973 PART NO. 50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026