PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 124-118
124-118 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

FILTER ELEMENT,INTAKE AIR CLEANE. Key specifications include material: STEEL OVERALL, thread_class: 3A A, locking_feature: PATCH OR STRIP OR PELLET THREADS, nominal_thread_diameter: 0.190 INCHES IN, thread_quantity_per_inch: 24, thread_series_designator: UNIFIED NATIONAL COARSE (UNC). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-425-5928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
124-118
NSN: 5305-01-425-5928
FSC: 5305
CAGE: 98523 — JERED LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thread_class3A A
locking_featurePATCH OR STRIP OR PELLET THREADS
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch24
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
material_document_and_classificationFF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5305-01-425-5928
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 124-118 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING FEATURE: PATCH OR STRIP OR PELLET THREADS
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD QUANTITY PER INCH: 24
•
THREAD CLASS: 3A A
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LOCKING FEATUREPATCH OR STRIP OR PELLET THREADS
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD QUANTITY PER INCH24
THREAD CLASS3A A
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONFF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
124-118Interchangeable
interchangeable cross-reference
interchangeable
100714Interchangeable
interchangeable cross-reference
interchangeable
F72G-2AN-AL1-543Interchangeable
interchangeable cross-reference
interchangeable
H604BN001 FIND NO 50Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 124-118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 124-118?
124-118 is a FILTER ELEMENT,INTAKE AIR CLEANE.
What parts can replace 124-118?
There are 4 known substitutes for 124-118: 124-118, 100714, F72G-2AN-AL1-543 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 124-118?
124-118 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-425-5928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 124-118

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026