123WM10111-5 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

123WM10111-5: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.408 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, thread_length: 0.241 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, screw_material: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4130, fastener_length: 1.101 INCHES MINIMUM AND 1.131 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-070-6015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

123WM10111-5

NSN: 5305-00-070-6015
FSC: 5305 — Screws
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

head_style	FLAT COUNTERSUNK
thread_class	3A A
head_diameter	0.408 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
thread_length	0.241 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
screw_material	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4130
fastener_length	1.101 INCHES MINIMUM AND 1.131 INCHES MAXIMUM IN
hardness_rating	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
special_features	INTERNAL HOLE IN HEAD 0.190 IN. NOM DIA,32 THDS PER IN. UNF-32 CLASS 3B,COUNTERSUNK 90 DEGREES IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
internal_drive_style	SLOT
nominal_thread_diameter	0.250 INCHES IN
NSN	5305-00-070-6015

COMPONENT DIAGRAM

KEY FEATURES

•

SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE

•

FASTENER LENGTH: 1.101 INCHES MINIMUM AND 1.131 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.241 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN

•

HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM

•

NOMINAL THREAD DIAMETER: 0.250 INCHES IN

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4130

TECHNICAL CHARACTERISTICS

SCREW SURFACE TREATMENT	CADMIUM AND CHROMATE
FASTENER LENGTH	1.101 INCHES MINIMUM AND 1.131 INCHES MAXIMUM IN
THREAD LENGTH	0.241 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER	0.250 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4130
SPECIAL FEATURES	INTERNAL HOLE IN HEAD 0.190 IN. NOM DIA,32 THDS PER IN. UNF-32 CLASS 3B,COUNTERSUNK 90 DEGREES IN
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH LBS

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 123WM10111-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 123WM10111-5?

123WM10111-5 is a SCREW,MACHINE.

What is the NSN for 123WM10111-5?

123WM10111-5 is cataloged in the U.S. Government catalog under NSN 5305-00-070-6015. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

123WM10111-5 — SCREW,MACHINE

Request a Quote — 123WM10111-5