PartsTable
Technical Data Sheet
Download PDF

123SMM50080-11 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

123SMM50080-11: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include end_radius: 0.440 INCHES NOMINAL IN, hole_shape: ROUND, hole_diameter: 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN, overall_width: 1.000 INCHES NOMINAL IN, fork_span_width: 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, special_features: HOLE LOCATED ON ONE PRONG AT A 45 DEGREE ANGLE, 0.092 IN. MIN.

TO 0.097 IN. MAX. DIA IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-494-8882, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123SMM50080-11
NSN: 5340-01-494-8882
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
end_radius0.440 INCHES NOMINAL IN
hole_shapeROUND
hole_diameter0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
overall_width1.000 INCHES NOMINAL IN
fork_span_width0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
special_featuresHOLE LOCATED ON ONE PRONG AT A 45 DEGREE ANGLE, 0.092 IN. MIN. TO 0.097 IN. MAX. DIA IN
style_designatorCLEVIS
fork_arm_thickness0.250 INCHES NOMINAL IN
securing_pin_hole_diameter0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
NSN5340-01-494-8882
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 123SMM50080-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.250 INCHES NOMINAL IN
•
END RADIUS: 0.440 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
HOLE SHAPE: ROUND
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
FORK ARM THICKNESS0.250 INCHES NOMINAL IN
END RADIUS0.440 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH1.000 INCHES NOMINAL IN
HOLE SHAPEROUND
SPECIAL FEATURESHOLE LOCATED ON ONE PRONG AT A 45 DEGREE ANGLE, 0.092 IN. MIN. TO 0.097 IN. MAX. DIA IN
HOLE DIAMETER0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 123SMM50080-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123SMM50080-11?
123SMM50080-11 is a CLEVIS,ROD END.
What is the NSN for 123SMM50080-11?
123SMM50080-11 is cataloged in the U.S. Government catalog under NSN 5340-01-494-8882. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123SMM50080-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.