PartsTable
Technical Data Sheet
Download PDF

123SAM50062-11 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

123SAM50062-11: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303SE OVERALL, shank_length: 0.300 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.270 INCHES NOMINAL IN, overall_length: 0.800 INCHES NOMINAL IN, shank_diameter: 0.138 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-022-0555, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123SAM50062-11
NSN: 5315-01-022-0555
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 303SE OVERALL
shank_length0.300 INCHES NOMINAL IN
thread_class2A A
thread_length0.270 INCHES NOMINAL IN
overall_length0.800 INCHES NOMINAL IN
shank_diameter0.138 INCHES NOMINAL IN
surface_finish125.000 MICROINCHES OVERALL
first_end_styleCHAMFERED
second_end_stylePOINTED
special_featuresSHANK END UNDERCUT 0.085 IN. MIN,0.090 IN. MAX DIA BY 0.030 IN. LG IN
style_designatorSHOULDER
thread_directionRIGHT-HAND
NSN5315-01-022-0555
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 123SAM50062-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.138 INCHES NOMINAL IN
•
SURFACE FINISH: 125.000 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END LOCATION: THREADED END
•
SECOND END TAPER ANGLE: 60.0 DEGREES NOMINAL
•
THREAD LENGTH: 0.270 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 0.300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.138 INCHES NOMINAL IN
SURFACE FINISH125.000 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END LOCATIONTHREADED END
SECOND END TAPER ANGLE60.0 DEGREES NOMINAL
THREAD LENGTH0.270 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH0.300 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
OVERALL LENGTH0.800 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 123SAM50062-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123SAM50062-11?
123SAM50062-11 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 123SAM50062-11?
123SAM50062-11 is cataloged in the U.S. Government catalog under NSN 5315-01-022-0555. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123SAM50062-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.