PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 123N
123N ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The STAPLER,PAPER FASTENING,OFFICE is a the manufacturer industrial component. Key specifications include leg_length: 0.250 INCHES NOMINAL IN, crown_width: 0.500 INCHES NOMINAL IN, design_type: DESK, throat_depth: 3.0 INCHES NOMINAL IN, usage_design: W/PREFORMED STAPLES, wire_diameter: 0.0170 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-272-4457, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123N
NSN: 5306-00-272-4457
FSC: 5306
CAGE: 0AT62 — SIEMENS ENERGY, INC. DBA DRESSER-RAND (USA)
SPECIFICATIONS
leg_length0.250 INCHES NOMINAL IN
crown_width0.500 INCHES NOMINAL IN
design_typeDESK
throat_depth3.0 INCHES NOMINAL IN
usage_designW/PREFORMED STAPLES
wire_diameter0.0170 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM IN
special_featuresCOLOR IS BLACK
NSN5306-00-272-4457
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 123N · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.625 INCHES MINIMUM IN
•
DISTANCE FROM CENTERLINE TO FLAT: 0.219 INCHES NOMINAL IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES NOMINAL FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-853 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HEAD HEIGHT: 0.312 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNF
•
THREAD CLASS: 3A A
•
FASTENER LENGTH: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.625 INCHES MINIMUM IN
DISTANCE FROM CENTERLINE TO FLAT0.219 INCHES NOMINAL IN
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES NOMINAL FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-853 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD HEIGHT0.312 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNF
THREAD CLASS3A A
FASTENER LENGTH2.500 INCHES NOMINAL IN
HEAD STYLEDEE
MATERIALSTEEL CORROSION RESISTING OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
A-A-360Interchangeable
interchangeable cross-reference
interchangeable
123NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 123N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123N?
123N is a STAPLER,PAPER FASTENING,OFFICE.
What parts can replace 123N?
There are 2 known substitutes for 123N: A-A-360, 123N. Substitute compatibility should be verified for your specific system.
What is the NSN for 123N?
123N is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-272-4457. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026