PartsTable
Technical Data Sheet
Download PDF

123CSM50006-11 — PAD EYE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

123CSM50006-11: PAD EYE.

The PAD EYE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, overall_width: 1.812 INCHES NOMINAL IN, pad_thickness: 0.100 INCHES NOMINAL IN, overall_height: 2.425 INCHES NOMINAL IN, overall_length: 2.125 INCHES NOMINAL IN, surface_treatment: CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-268-6975, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123CSM50006-11
NSN: 5340-01-268-6975
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
overall_width1.812 INCHES NOMINAL IN
pad_thickness0.100 INCHES NOMINAL IN
overall_height2.425 INCHES NOMINAL IN
overall_length2.125 INCHES NOMINAL IN
surface_treatmentCHROMATE OVERALL
eye_inside_diameter0.4375 INCHES MINIMUM AND 0.4385 INCHES MAXIMUM IN
eye_stock_thickness0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
mounting_facility_diameter0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
mounting_facility_quantity4
material_document_and_classificationQQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
NSN5340-01-268-6975
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 123CSM50006-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
MOUNTING FACILITY QUANTITY: 4
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
OVERALL HEIGHT2.425 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY4
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.125 INCHES NOMINAL IN
OVERALL WIDTH1.812 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE OVERALL
EYE INSIDE DIAMETER0.4375 INCHES MINIMUM AND 0.4385 INCHES MAXIMUM IN
EYE STOCK THICKNESS0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 123CSM50006-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123CSM50006-11?
123CSM50006-11 is a PAD EYE.
What is the NSN for 123CSM50006-11?
123CSM50006-11 is cataloged in the U.S. Government catalog under NSN 5340-01-268-6975. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123CSM50006-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.