PartsTable
Technical Data Sheet
Download PDF

123CM10034-511 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

123CM10034-511: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, fork_depth: 1.062 INCHES NOMINAL IN, hole_diameter: 0.2497 INCHES MINIMUM AND 0.2507 INCHES MAXIMUM IN, overall_width: 1.254 INCHES MINIMUM AND 1.259 INCHES MAXIMUM IN, fork_span_width: 0.620 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN, surface_treatment: PRIMER OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-272-1538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
123CM10034-511
NSN: 5340-01-272-1538
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
fork_depth1.062 INCHES NOMINAL IN
hole_diameter0.2497 INCHES MINIMUM AND 0.2507 INCHES MAXIMUM IN
overall_width1.254 INCHES MINIMUM AND 1.259 INCHES MAXIMUM IN
fork_span_width0.620 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN
surface_treatmentPRIMER OVERALL
fork_arm_thickness0.156 INCHES NOMINAL IN
width_across_flats1.000 INCHES NOMINAL IN
rod_connection_bore_depth6.750 INCHES MINIMUM AND 6.781 INCHES MAXIMUM IN
securing_pin_hole_diameter0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
rod_connection_bore_diameter0.749 INCHES MINIMUM AND 0.758 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-272-1538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 123CM10034-511 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.000 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.620 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.156 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: GSS4310,GRUMMAN AIRCRAFT CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 0.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.000 INCHES NOMINAL IN
FORK SPAN WIDTH0.620 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
FORK ARM THICKNESS0.156 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONGSS4310,GRUMMAN AIRCRAFT CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.254 INCHES MINIMUM AND 1.259 INCHES MAXIMUM IN
SURFACE TREATMENTPRIMER OVERALL
ROD CONNECTION BORE DIAMETER0.749 INCHES MINIMUM AND 0.758 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 123CM10034-511?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 123CM10034-511?
123CM10034-511 is a CLEVIS,ROD END.
What is the NSN for 123CM10034-511?
123CM10034-511 is cataloged in the U.S. Government catalog under NSN 5340-01-272-1538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 123CM10034-511

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.